Being a menu-driven program, it lets you scroll through the various sub-menus and make your selections from the available options using the navigation keys. Remove the onboard battery. Tips and additional information to help you complete a task. Orient the red markings on the floppy ribbon cable to PIN 1. DO NOT place jumper caps on the fan connectors.

Uploader: JoJosida
Date Added: 4 February 2011
File Size: 22.71 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 84119
Price: Free* [*Free Regsitration Required]

Unlock a DIMM socket by pressing the retaining clips outward.

Halt On [All Errors] Allows you to error report type. At the DOS prompt, type format A: This prevents incorrect insertion when you connect the IDE cable. Product introduction This chapter describes the features of the motherboard and the new technology it supports.

ASUS K8N4-E SE, Socket 754, AMD (90-M9B0LA-G0EAYVZ) Motherboard

Secure the card to the chassis with the screw you removed earlier. Remove the onboard battery. Make sure that the fan and heatsink assembly perfectly fits the retention mechanism module base, otherwise you cannot snap the retention bracket in place.

Refer to the ethernnet configuration table on the next page for the function of the audio ports in 2, 4, or 6-channel configuration. Memory is prevented from running faster than this frequency.


The DIMM might get etherner when it flips out with extra force. The chassis intrusion sensor or switch sends a high-level signal to this connector when a chassis component is removed or replaced.

These are not jumpers! The following figure shows a graphics card installed on the PCI Express x16 slot. Align the other end of the retention bracket near the retention bracket lock to the retention module base.

Hardware monitoring errors can occur if you fail to plug this connector. Refer to the connector description below for details.

Install the necessary etthernet to activate the devices.

Asus K8N4-E Specifications |

aus Make sure to unplug the ehhernet cord before adding or removing expansion cards. Product introduction Chapter 1: Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card. Page 5 Chapter 3: How this guide is organized Conventions used in this guide Conventions used in this guide Conventions used in this guide Conventions used in this guide Conventions assu in this guide To make sure that you perform certain tasks properly, take note of the following symbols used throughout this manual.


The edge with external ports goes to the rear part of the chassis as indicated in the image below. Position the CPU above the socket such that the CPU corner with the gold triangle matches the socket corner with a small triangle.

Detailed descriptions of the BIOS parameters are also provided. Find the proper orientation and push down firmly until the connectors completely fit. Creating a bootable floppy disk Do either one of the following to create a bootable floppy disk.

ASUS K8n4-e Socket 754 Pci-e DDR SATA Nforce4 ATX – Tested and Working

To clear the password: The contents of the support CD are subject to change at any time without notice. Connect the chassis power LED cable etheernet this connector. These items are not user-configurable.

No need to use a DOS-based utility or boot from a floppy disk.

Boot Settings Configuration 2.